silicon mosfets (small signal) 1 publication date: september 2007 sjf00075aed this product complies with the rohs directive (eu 2002/95/ec). 2SK0601G silicon n-channel mosfet for switching circuits features ? low drain-souce on resistance r ds(on) ? high-speed switching ? allowing to be driven directly by cmos and ttl ? mini-power type package, allowing downsizing of the sets and automatic insertion through the tape/magazine packing. absolute maximum ratings t a = 25 c electrical characteristics t a = 25 c 3 c parameter symbol conditions min typ max unit drain-source surrender voltage v dss i ds = 100 a, v gs = 080 v drain-source cutoff current i dss v ds = 60 v, v gs = 010 a gate-source cutoff current i gss v gs = 20 v, v ds = 0 0.1 a gate threshold voltage v th i d = 1 ma, v ds = v gs 1.5 3.5 v drain-source on resistance * 1 r ds(on) i d = 0.5 a, v gs = 10 v 2 4 ? forward transfer admittance ? y fs ? i d = 0.2 a, v ds = 15 v, f = 1 khz 300 ms short-circuit forward transfer c iss v ds = 10 v, v gs = 0, f = 1 mhz 45 pf capacitance (common source) short-circuit output capacitance c oss 30 pf (common source) reverse transfer capacitance c rss 8pf (common source) turn-on time * 2 t on 15 ns turn-off time * 2 t off 20 ns parameter symbol rating unit drain-source voltage v ds 80 v gate-source voltage (drain open) v gso 20 v drain current i d 0.5 a peak drain current i dp 1.0 a power dissipation * p d 1w channel temperature t ch 150 c storage temperature t stg ? 55 to + 150 c note) 1. measuring methods are based on japanese industrial standard jis c 7030 measuring methods for transistors. 2. * 1: pulse measurement * 2: t on , t off measurement circuit note) * : pc board: copper foil of the drain portion should have a area of 1 cm 2 or more and the board thickness should be 1.7 mm. v out v dd = 30 v v in = 10 v t = 1 s f = 1 khz 50 ? 68 ? v in 90% 90% 10% 10% v out t on t off v package ? code minip3-f2 ? pin name 1: gate 2: drain 3: source marking symbol: o maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
2SK0601G 2 sjf00075aed this product complies with the rohs directive (eu 2002/95/ec). r ds(on) ? t a ? y fs ? ? v gs c iss , c oss , c rss ? v ds r ds(on) ? v gs p d ? t a i d ? v ds i d ? v gs ambient temperature t a ( c) power dissipation p d (w) 1.6 1.2 0.8 0.4 0 40 80 160 120 0 copper plate at the drain is more than 1 cm 2 in area, 1.7 mm in thickness. drain-source voltage v ds (v) drain current i d (a) 1.2 1.0 0.8 0.6 0.4 0.2 0 246810 0 t a = 25 c v gs = 5.5 v 5 v 4.5 v 4 v 3.5 v 3 v gate-source voltage v gs (v) drain current i d (a) 1.2 1.0 0.8 0.6 0.4 0.2 0 246810 0 v ds = 10 v t a = 25 c gate-source voltage v gs (v) 600 500 400 300 200 100 0 123456 0 forward transfer admittance ? y fs ? (ms) v ds = 15 v f = 1 khz t a = 25 c drain-source voltage v ds (v) 120 100 80 60 40 20 0 10 10 2 1 0 3 1 v gs = 0 f = 1 mhz t a = 25 c c iss c oss c rss short-circuit forward transfer capacitance (common source) c iss , short-circuit output capacitance (common source) c oss , reverse transfer capacitance (common source) c rss (pf) gate-source voltage v gs (v) drain-source on resistance r ds(on) ( ? ) 6 5 4 3 2 1 0 4 8 12 16 20 0 t a = 75 c i d = 500 ma 25 c ? 25 c ambient temperature t a ( c) drain-source on resistance r ds(on) ( ? ) 6 5 4 3 2 1 0 ? 250 255075 ? 50 i d = 500 ma v gs = 5 v 10 v maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
2SK0601G 3 sjf00075aed this product complies with the rohs directive (eu 2002/95/ec). minip3-f2 unit: mm 1.60 0.20 4.50 0.10 4.00 0.20 0.40 0.08 0.50 0.08 1 2 3 2.60 0.10 0.50 max. 3.00 0.15 (5 ) 1.50 0.10 2.50 0.10 0.41 0.03 1.50 0.10 1.00 0.10 (45 ) (5 ) maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
